All door and quarter panels are
made from lightweight .032-inch aluminum unless otherwise noted.These
panels are designed to be installed with screws and finishing washers,
which are included with each order. Prices below are PER SET of
panels.
The panels come fully bead rolled
with nearly unlimited design choices.A unique feature of the Big Wig Race Cars panels is that
they have a very slight bevel rolled around the entire perimeter of
each piece, giving the finished panel a very professional look and
allowing it to sit tight against the mounting surface for a flat,
rattle-free fit.
Door and quarter panel sets come
already drilled for #6 screws, which are also included. Holes
for door handles, window cranks, or switches can be cut at no
additional charge.
Each piece is covered in
protective white plastic sheeting throughout all the marking, cutting,
and beading operations to prevent scratches.
After fabrication, I remove the plastic, and wax each piece with a
spray-on stainless steel cleaner/wax/polish. The bare
aluminum will look amazing in its raw finish!The wax gives the panels a beautiful semi-gloss look,
prevents the aluminum from oxidizing, and is easy to re-apply
periodically if you want to leave the aluminum bare.
Brushed, anodized, painted, or
powdercoated finishes are not available from me, but could be done by
you upon receipt if so desired.
If you want to design your own
pattern and have me incorporate that into your panels, please email me
at bigwig1@bigwigracecars.com.
I
am always willing to work with you to make sure you get the unique
look you want.
All
online ordering is via secure site.However,
if you would prefer to pay by mail, please contact me at bigwig1@bigwigracecars.com
for further information.
Shipping
prices are for US only. Contact me for foreign
orders.
NOTE: all truck panels come standard in
.050" thick medium-weight aluminum.
If you want lightweight .032" thickness,
select that option when you order.
design shown above: PREMIUM -
Top & Bottom Pleats with "Map Pocket"
Cutouts - panels can be
build with no cutouts, or cut for any combination of door
handles, locks, and window cranks for no extra
charge.
Corner
Covers - optional corner covers available
for $50/pr
1994-2004 S10, Blazer, Sonoma,
Jimmy
94-04 Corner Covers - optional corner covers available for
$50/pr
94-04 S10 door handle cutouts
94-97 no bezel
94-97 with bezel
98-04 no bezel
98-04 with bezel (bezel not shown)
1982-2004
S-10
Chevy S10,
Blazer / GMC Sonoma, Jimmy
NOTE:
I will contact you via email after receipt of online
order to determine which design you want.
Lead time on new orders is approx 10 weeks.
Select from BLANK,
BASIC, or PREMIUM designs, or send your own
design for a quote.
Shipping fees are for Continental US
only. Email for quote to HI, AK,
USVI, or international.
1982-1993 1st gen
S10 / Blazer / Sonoma / Jimmy
DOOR PANELS
price per pair
Blank
$425
Basic
$475
Premium
$565
shipping
$90
1994-2003 2nd gen
S10 / Blazer / Sonoma / Jimmy
DOOR PANELS
price per pair
Blank
$425
Basic
$475
Premium
$565
shipping
$90
1982-2004
S-10 OPTIONAL ITEMS
add corner covers
pair
$50
ADD DOOR PULLS
sold per pair, with hardware
DESIGN:
smooth
$45
single
rib
$60
flared
holes
$60
only avail when buying door panels
GM
Fullsize Trucks
NOTE: All truck panels come standard
in .050" thick medium-weight aluminum.
Some can be made in optional lightweight
.032" thickness which you can select when ordering if offered.
47-54 AD trucks
67-72 C10 SHORT
1967-1972 C10 TALL Above design has MANY
upgrades. Shown for sizing purposes. If
you are interested in a style like this, email me for
more info. They are far above premium pricing.
1973-1987
front doors
73-87 C10 SHORT
73-87 C10 TALL
73-91 Crew Cab panels
1988-1998 NOTE: Shown below with 88-94
door handle
& power switches cutout.
1992-2002 C2500/C3500 Crew Cab
Above shown with cutout for
88-94 power switches (not available for
95-98 power switches)
99-06 Silverado
Above shown with splined shaft handle conversion (door handle &
window crank not included)
99-06
stock handle
99-06
optional splined conversion
Splined
handle (not included)
99-06
Lock knob (included)
GM Fullsize Trucks
Chevy, GMC
NOTE 1: Truck panels come standard in
thicker .050" aluminum.
Race-weight thickness of .032" is available as option on some.
NOTE 2: I will contact you via email after receipt of
online order to determine which design you want.
Lead time on new orders is approx 10 weeks.
Select from BLANK, BASIC, or PREMIUM
designs, or send your own design for a quote.
Shipping fees are for Continental US
only. Email for quote to HI, AK, USVI, or
international.
1947-1954 GM
3100 Truck
DOOR PANELS
full door
panels
price per pair
Blank
$425
Basic
$475
Premium
$565
shipping $90
1947-1954 GM
3100 Truck
DOOR PANELS & KICK PANELS
full door
panels
price per pair
Blank
$500
Basic
$550
Premium
$640
shipping $90
1967-1972 C10
DOOR PANELS
Full door
panels
price per pair
Blank
$425
Basic
$475
Premium
$565
shipping $90
1973-1987 C10
DOOR PANELS
Door panels
price per pair
Blank
$425
Basic
$475
Premium
$565
shipping $90
1973-1991 GM Full Size Crew CabTruck
DOOR PANELS
(front & rear)
Full door
panels
price per pair
Blank
$795
Basic
$895
Premium
$1045
shipping $120
1988-1998
GM Fullsize Truck
DOOR PANELS
Full door panels
price per pair
Blank
$425
Basic
$475
Premium
$565
shipping $90
1999-2006
GM Fullsize Truck
DOOR PANELS
Full door panels
price per pair
Blank
$425
Basic
$475
Premium
$565
shipping $90
1992-2002
GM Fullsize Crew CabTruck
DOOR PANELS
(front & rear)
Full door panels
price per pair
Blank
$795
Basic
$895
Premium
$1045
shipping $120
GM FULL SIZE TRUCK
OPTIONAL ITEMS
add 88-98 or 99-06
C1500 corner covers
pair
$50
add 99-06 splined shaft door handle
conversion
pair
$60
ADD DOOR PULLS
sold per pair, with hardware
DESIGN:
smooth
$45
single rib
$60
flared holes
$60
only avail when buying door panels
Ford full size
trucks
NOTE: all truck panels come standard in
.050" thick medium-weight aluminum.
1953-55 F-100
Above - Horizontal pleated
inserts (premium)
-- shown with optional
"lines & craters" border (+$40) and speaker hole in
kick panel -- 1968-72
F100 / F250 above is premium design
"F100 top & bottom diamond pleats"
1973-79 F100 / F250
TALL panels above is premium design "diamond
pleats" with optional arm rest
1973-79
F100 SHORT panel above is basic design
"F100Cynthia" + optional pull handle
1973-79 F100 standard release
handle cover (handle cover included in panel
prices below; pull handle extra)
1973-79 F100 optional arm rest
with
integrated finger pull & release handle
Is pricing for single panels or for set of panels? - All prices above are for complete
sets. Pull handles are priced per pair.
Will these work with roll-up windows? - The panel will not interfere with
the window. However, you will need to come up with your
own solution for an inside window scraper if you still need
that. The panels all have a 5/8 lip along the top
outside edge that drops down into the window
channel. In some cases the factory scraper can be
attached to this lip, or you could attach a universal weatherstrip
to that edge if needed, but that would be completely up to you.
How do I specify which design I want? After I get your order, I will email you to
confirm the order and ask which design you want. Just make
sure you are ordering the correct pricing category - BLANK, BASIC or PREMIUM designs, based on the examples
shown thoughout this page.
When will I get my panels? Typically, 4-5 weeks from order
until ship, plus shipping time. I use FedEx ground and these
ship from Austin, TX.
Can you do other designs not shown above? Definitely. Email
me to inquire about a custom design. Nearly anything is
possible. I have done hundreds of sets of door panels for
various cars, with designs from very mild to very wild.
